Ash Content Muffle Furnace

Name: Ash Content Muffle Furnace
Brand: TestShine

Ash Content Muffle Furnace for Determining Inorganic Residue in Materials

1 / 2

TS-ACMF1

Ash Content Muffle Furnace

Laboratory instrument designed for high-temperature combustion of organic substances to determine the mass proportion of residual inorganic materials.

Key Specifications

Temperature Range

100–1000°C / 100–1200°C

Temperature Fluctuation

±2°C

Display Accuracy

1°C

Heating Rate

≤10°C/min

Ash Content Muffle FurnaceAsh Content TestingPlastic TestingMaterial Analysis

Request a Quote Request Sample Testing

Global Shipping

50+ countries

2-Year Warranty

Parts & service

Expert Support

Dedicated team

Have a question about this instrument?

Talk to an expert

Product Information

The TS-ACMF1 Ash Content Muffle Furnace is used to remove organic substances from samples through high temperature combustion, so that the mass proportion of the residual inorganic substances can be determined.

Key Features

The furnace is heated from all sides by a resistance wire heating element.
Temperature is measured by a K-type thermocouple.
The furnace is compliant with ISO 3451-1: 1997, "GB/T 9345.1-2008 Plastics - Determination of Ash Content - Part 1 General Method".
The outer box shell is made of high quality cold plate, treated with phosphoric acid film salt and then sprayed with a high temperature plastic coating. The color is computer gray.

Technical Parameters

Parameter	Specification
Model	2.5-10; 2.5-12; 4-10; 5-12; 8-10; 10-12; 12-10; 12-12
Temperature Range	100~1000℃; 100 ~ 1200℃; 100 ~ 1000℃; 100 ~ 1200℃; 100 ~ 1000℃; 100 ~ 1200℃; 100 ~ 1000℃; 100 ~ 1200℃
Fluctuation Degree	±2℃
Display Accuracy	1℃
Furnace Chamber Size HWD (mm)	80120200 (1.6L); 80120200 (1.6L); 120200300 (7.2L); 120200300 (7.2L); 160250400 (16L); 160250400 (16L); 200300500 (30L); 200300500 (30L)
Heating Rate	Average ≤10℃/min
Total Power	2.5kw; 2.5kw; 4kw; 5kw; 8kw; 10kw; 12kw; 12kw
Power Supply	220V, 50Hz; 380V, 50Hz
Furnace Shell Material	The outer shell is made of high-quality cold-rolled steel plate, treated with phosphating film salt and sprayed with high-temperature plastic, with the color of computer gray
Furnace Liner Material	High-aluminum inner liner with good wear resistance; the high-temperature furnace heats from the upper, lower, left and right sides
Heat Insulation Method	Insulation bricks and insulation cotton
Temperature Measuring Port	Thermocouple enters from the upper rear of the furnace body
Terminal Block	The terminal block for the heating furnace wire is located at the lower rear of the furnace body
Controller	Located at the lower part of the furnace body, with a built-in control system connected to the furnace body via compensation wires
Heating Element	High-temperature resistance wire
Standard Packaging	Wooden box
Temperature Measurement	K-type nickel-chromium -- nickel-silicon thermocouple
Control System	PID regulation, display accuracy of 1℃
Complete Electrical Appliances	Adopt brand contactors, cooling fans and solid-state relays
Timer	Working time can be set; automatically shuts down when the constant temperature time is reached
Over-temperature Protection	Built-in two-stage over-temperature protection device for double insurance; over-temperature alarm and over-temperature current cutoff

Applications

Plastic Testing: Determination of ash content in plastic materials according to the specified standards.
Material Analysis: Removal of organic substances through high-temperature combustion to determine residual inorganic content.
Quality Control Laboratories: Ash content testing of samples for material quality evaluation.
Scientific Research: High-temperature combustion testing for determining the inorganic residue in samples.

Request for Pricing